How many pallet positions fit in my warehouse?

The count depends on clear height, aisle width, your forklift and the loads being stored. Our free CAD layout gives the exact pallet-position count for the proposed arrangement before you buy, with receiving and staging space kept in the plan.

How long does it take to get and install pallet rack?

Standard teardrop sizes often quick-ship; high-density systems and non-standard sizes take longer, with lead time confirmed on the quote. Installation time depends on bay count and site readiness. We agree the delivery, staging and installation sequence before work starts.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs that need direct access. Pushback stores two to six pallets deep with LIFO rotation by SKU; pallet flow suits FIFO or dated stock; drive-in suits bulk storage of a few SKUs; cantilever holds long loads; carton flow supports case picking.

How much weight can pallet rack hold?

There is no single capacity for pallet rack: beam capacity is per pair, per level, and frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and put the capacities for the finished arrangement on load plaques.

How much does pallet rack cost in Folsom?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote. We supply new material only.

Pallet Flow Rack system inside a California warehouse

Folsom, California

Pallet Flow Rack in Folsom, CA

Folsom medical or specialty distribution may require pallets to follow their receipt sequence. Flow lanes support physical FIFO, but the inventory records must still track lots and release status.

For pallet flow rack in Folsom, the first step is to compare pallet dimensions, maximum weights, SKU depth and stock rotation with the space you actually have. We show the proposed arrangement in a CAD layout, identify the access it needs and explain the tradeoffs before you approve the work. Send your building measurements and inventory requirements for a free design consultation and an itemized quote. The aim is usable storage that supports your next receipt or shipment, not a position count that only works on paper.

(916) 357-9401

Why Folsom Warehouses Work With Us

Folsom buildings near Blue Ravine Road and Folsom Boulevard can serve very different inventories from a broad-line regional warehouse. We ask which products need lot tracking, what must stay near a work area and which loads can move into reserve positions. US-50 provides the regional connection, while the actual building controls dock access and delivery size. Any environmental or handling requirements come from the operator's written specifications; a rack design alone does not establish cleanroom, medical or electronics compliance.

Folsom medical or specialty distribution may require pallets to follow their receipt sequence. Flow lanes support physical FIFO, but the inventory records must still track lots and release status. As a division of Warehouse Equipment & Supplies Co., Sacramento Pallet Racks brings those questions into the consultation before recommending a system. You receive a drawing, an explained scope and a named point of contact. Installation is by experienced installation crews we schedule and manage. Our team handles the permit side for you. Before ordering, we review the proposed position count alongside staging, picking and replenishment access. If two rack types could fit, we explain the storage and rotation tradeoffs rather than choosing from capacity alone. Your receiving hours, available work zones and approval requirements shape a written project plan.

Free warehouse consultation

CAD layout with position counts

Installation coordinated with installation partners

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Storage and Industrial Context

Service-area context includes Folsom Boulevard, Blue Ravine Road, US-50.

Technology supplies

Medical distribution

Specialty fulfillment

How Pallet Flow Rack Works

Load one side, pick the other, and let gravity enforce first in, first out.

Load end

Pallets enter at the high end of the lane. Each new pallet stages behind the one before it, so put-away is a single move made from the load-side aisle.

Gravity conveyor

Full-width rollers or skate-wheel tracks, set on a pitch calculated for the pallet weight, carry loads forward under control rather than free rolling.

Braking and separation

Brake rollers and pallet separators regulate travel and stop pallets from bunching, protecting both the product and the structure underneath it.

Pick end

Pickers work a face of first-in pallets. Pull one and the next indexes forward automatically, so the pick aisle stays organized without anyone re-facing stock.

What a Pallet Flow Rack Project Includes

For the Folsom site, we begin with pallet dimensions, maximum weights, SKU depth and stock rotation. Share photos, available drawings, receiving hours and the part of the floor that must remain open. We check the proposed work against columns, doors, overhead obstructions and handling access. Access around Folsom Boulevard is considered when agreeing delivery and installation arrangements.

Flow racking is engineered per lane, not pulled off a shelf. Pallet weight, deck condition, bottom-board orientation, and desired lane depth all drive the roller or wheel selection and the pitch calculation, so the first step is pinning down exactly what's moving through the lane.

From there we set lane count and depth against your throughput. Fewer, deeper lanes maximize storage; more, shallower lanes give the pick face more SKU variety. Both versions get modeled with position counts so the tradeoff is visible before you buy, not found after.

The itemized quote covers frames, beams, rail and roller assemblies, brakes, entry and exit guides, and guarding. At installation the crew sets pitch, tests loaded travel in every lane, and tunes brakes before the system goes live.

Afterward you have documented capacities, a lane map your team can hand to new hires, and a project contact for capacity questions and future layout changes.

Before work at the Folsom building begins, the approved scope identifies responsibility for delivery, installation and any exclusions. Manufacturer documentation and the final configuration establish load ratings; moving a level or reusing a component does not automatically preserve its previous rating. At handover, review the layout and operating limitations with your team, retain the documentation, and keep load plaques available for operators. Scheduling is confirmed for the project rather than promised from a standard turnaround estimate.

Date-coded food, beverage, and pharmaceutical inventory

High-volume SKUs with steady, predictable turns

Cold storage where every cubic foot carries a cost

Staging finished goods coming off a production line

Operations that need FIFO documented, not just assumed

Call (916) 357-9401

Recent Installations

A selection of recent pallet rack installations.

View More Projects

Get a Pallet Flow Rack Quote for Your Folsom Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (916) 357-9401.

Sacramento Pallet Racks

836 57th St.

Ste 410

Sacramento, CA 95819

(916) 357-9401

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Sacramento Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.