How much weight can cantilever rack hold?

There is no single capacity: arm capacity and total column capacity depend on arm length, load distribution and the configured levels. We size the arms and columns from your heaviest bundle and put the finished arrangement's capacities on load plaques.

Can I add on to my existing pallet rack?

Usually, if the connection matches and the existing configuration has the required capacity. "Teardrop" is not universal across manufacturers: send a photo of the upright face, beam connector and any label so we can match compatible new additions.

Do you install pallet rack?

Yes. We handle design, new material supply and installation by experienced installation crews we schedule and manage. The rack is anchored to the floor, leveled and fitted with load plaques for the finished configuration.

What type of pallet rack do I need?

Selective teardrop rack is the starting point for mixed SKUs that need direct access. Pushback stores two to six pallets deep with LIFO rotation by SKU; pallet flow suits FIFO or dated stock; drive-in suits bulk storage of a few SKUs; cantilever holds long loads; carton flow supports case picking.

How much does pallet rack cost in Elk Grove?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and an itemized quote. We supply new material only.

Cantilever Rack system inside a California warehouse

Elk Grove, California

Cantilever Rack in Elk Grove, CA

Contractor supplies near Grant Line Road can include long stock that does not fit conventional bays. Storing it on correctly spaced arms can restore the floor needed for loading vehicles.

For cantilever rack in Elk Grove, the first step is to compare bundle length, load weight, arm spacing and handling clearance with the space you actually have. We show the proposed arrangement in a CAD layout, identify the access it needs and explain the tradeoffs before you approve the work. Send your building measurements and inventory requirements for a free design consultation and an itemized quote. The aim is usable storage that supports your next receipt or shipment, not a position count that only works on paper.

(916) 357-9401

Why Elk Grove Warehouses Work With Us

For buildings serving Elk Grove through Highway 99 and Grant Line Road, rack planning should account for both reserve stock and frequent outbound movements. A small operation near Laguna Boulevard may need compact picking faces, while a larger industrial floor needs room for pallet staging and turning. We ask where returns are checked, which doors accept deliveries and which products move every day. Those answers shape the layout more usefully than assuming every Elk Grove business needs the same depth of storage.

Contractor supplies near Grant Line Road can include long stock that does not fit conventional bays. Storing it on correctly spaced arms can restore the floor needed for loading vehicles. As a division of Warehouse Equipment & Supplies Co., Sacramento Pallet Racks brings those questions into the consultation before recommending a system. You receive a drawing, an explained scope and a named point of contact. Installation is by experienced installation crews we schedule and manage. Our team handles the permit side for you. Before ordering, we review the proposed position count alongside staging, picking and replenishment access. If two rack types could fit, we explain the storage and rotation tradeoffs rather than choosing from capacity alone. Your receiving hours, available work zones and approval requirements shape a written project plan.

Free warehouse consultation

CAD layout with position counts

Installation coordinated with installation partners

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Storage and Industrial Context

Service-area context includes Highway 99, Grant Line Road, Laguna Boulevard.

Retail replenishment

Last-mile distribution

Light manufacturing

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

For the Elk Grove site, we begin with bundle length, load weight, arm spacing and handling clearance. Share photos, available drawings, receiving hours and the part of the floor that must remain open. We check the proposed work against columns, doors, overhead obstructions and handling access. Access around Highway 99 is considered when agreeing delivery and installation arrangements.

Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs.

From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out.

The quote itemizes columns, bases, arms and bracing, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Experienced installation crews we schedule and manage install bases anchored to the floor, level columns and brace the run, and set arm elevations to the drawing.

The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy.

Before work at the Elk Grove building begins, the approved scope identifies responsibility for delivery, installation and any exclusions. Manufacturer documentation and the final configuration establish load ratings; moving a level or reusing a component does not automatically preserve its previous rating. At handover, review the layout and operating limitations with your team, retain the documentation, and keep load plaques available for operators. Scheduling is confirmed for the project rather than promised from a standard turnaround estimate.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (916) 357-9401

Recent Installations

A selection of recent pallet rack installations.

View More Projects

Get a Cantilever Rack Quote for Your Elk Grove Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (916) 357-9401.

Sacramento Pallet Racks

836 57th St.

Ste 410

Sacramento, CA 95819

(916) 357-9401

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Sacramento Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.